Test pin finger probe

These two test probe separately confirm to the IEC60884-1 figure 9 and figure 10.The HT-I20 test probe with 20N force is used to test whether the live parts inside can be touched. The HT-I21 test probe with 1N force is for testing whether the live parts with the protection of socket can be touched.

HT-I26 scratch probe is specially designed for the easily accessible component surfaces of the protected cooling system in household appliances, including the scratch test of the easily accessible surface in close contact with the protected cooling system, such as the scratch resistance test of refrigerator doors. It strictly complies with GB4706.13 Figure 102, IEC60335-2-24 Figure 102 and other standards, and the quality is guaranteed by the source manufacturer.

HT-I24 Test Finger Probe is specially designed for the safety inspection of hand blenders. It strictly complies with the IEC 60335-2-14 standard. It uses a nylon handle and a stainless steel probe to accurately inspect and provide reliable protection for the safety performance of hand blenders. It is your trusted inspection partner.

This probe conforms to standard requirement of UL507 Fig 8.1(PA160B) and UL1278 Fig 9.1(PA160). It is used for testing accessibility to hazardous moving parts such as access to fan blades through a fan finger guard. The handle is made of nylon while the finger is made of stainless steel. The end of the handle is with threaded hole which can be equipped with the dynamometer.

The Cone Probe meets UL1278 Fig 10.1 standards, featuring a stainless - steel probe and nylon handle. Designed to test heating elements and components, it ensures protection against contact with people and flammable materials. Engineered to the standard’s specifications, it delivers reliable results for safety compliance evaluations.

The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. It conforms to the IEC60335-2-14 requirement. Appliance is checked by applying a cylindrical rod whose diameter is 40mm and which has a hemispherical end to touch the switch with a force not exceed 5N.The appliance shall not operated.

HT-U16 Test Finger Probe is designed in strict accordance with UL507 Fig 8.2 (S2140A) standard. Its innovative nylon handle + stainless steel probe combination takes into account both operational comfort and detection accuracy, providing reliable protection for product safety.

This probe conforms to the IEC60335-2-11 figure 104 and IEC60335-2-6-2002 figure 104 standard requirements. It is mainly used to measure the temperature rise on the front surface of the easily accessible parts of drum-type dryer, upright electric cooker, cooking bench and oven.

This pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. It conforms to IEC61032 figure 9 Test probe13, IEC60950 figure 2B, IEC60335 and IEC60065 standard requirements. Customizable: It can be used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer).

This pin is intended to be used on appliances for verifying the inaccessibility of hazardous live parts or hazardous mechanical parts which are liable to be touched accidentally by a tool, for example a screwdriver or similar pointed object in normal use. It meets IEC61032 figure 8 test probe 12. Handle is made of nylon while the tip is made of hardened steel.Customizable: It can be used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer).

This test probe conforms to IEC60335-2-24 Clause 21.102. It is used for protection test on the lamps of household appliances.

The HT-U07 triangular probe strictly complies with the UL1278 Fig 10.3 standard and is specially designed for safety protection detection of heating elements and components. It protects flammable materials and personnel safety with precise and reliable performance.